The following is a list of the current programs available for the exciting J&M ROKKER XXRP 630w High-Power DSP(digital signal processor) controlled audio amplifiers OR 630W ROKKER EXTREME Speaker/Amplifier kits with J&M RCA input harnesses with the large GREEN-BAND.
To be used with the 2014-2018 Harley Infotainment Radios (either version) that have NEVER BEEN FLASHED from Stock Condition.
"IF" your Harley radio HAS BEEN flashed from stock, return to your Harley dealer and have it flashed back to stock condition, by going to the speakers TAB on the Harley digital technician screen, CHOOSING "0" amps, then CHECKING the box "4-speakers, upper fairing/rear pods".
This stock Harley flash will also activate the front/rear fader control and activate the rear channel audio outputs on the Harley radio.
Prior to choosing and installing the specific program for your J&M ROKKER XXRP 630w amplifier, please download and/or print the download instructions as contained in the .pdf file below.
Should you have any questions about the specific programs or have any difficulty during the download process, you may send an email direct to ROKKER_DSP_PRO@Jmcorp.com for assistance.
Special programming note: Using an incorrect DSP program which causes the amplifier to overdrive the speakers to extremely high volume and/or distortion levels, can and will permanently damage the speakers and this type of damage is NOT covered under the J&M speaker warranty.