facebook youtube

Product Description

J&M Blu<>Hub Dual-Module Driver/Passenger Bluetooth® Dongle Kit w/ aptX Digital Stereo 2014-18 Harley® Ultra/Street/Road

# JBLU-DNG44-HD14

Add to Cart  

JBLU-DNG44-HD14
$599.99
In Stock, Will Ship Within 2 Business Days

This is J&Ms brand new Blu<>Hub® dual-module Bluetooth Dongle kit featuring the CSR/Qualcomm BlueCore8 IC chip-sets, loaded with J&M’s exclusive JMAHP software profile, for installation into 2014-2018 Harley Ultra, Ultra Ltd, StreetGlide or RoadGlide with either version of the Harley Infotainment Radio. (extra cable adapter needed for use on 2018 CVO Ultra)

This latest version of the JMAHP profile from J&M provides low-latency aptX™ digital stereo to the headset, (aptX decoding active with BT03+/BT04 or later model J&M headset) with simultaneous and continuous microphone signals back to the dongle audio source, allowing full stereo music, private driver/passenger intercom, navigation commands, cell phone conversations and CB radio transmissions, JUST as if you were using a corded headset, but WITHOUT the cord!

Now you can finally “Cut-The-Cord” between your helmet headset and the factory audio system on the Harleys WITHOUT sacrificing that great J&M sound!

The factory handlebar volume controls will raise and lower the music, intercom, navigation, cell-phone & CB volume levels inside each Bluetooth headset, once linked and adjusted.

Either driver or passenger can also link their own cell phones direct to their individual J&M Bluetooth headsets, simultaneously with this Blu<>Hub dongle, for automatic switching back & forth between stereo music/intercom/CB and individual cell phone conversations.

With this J&M Blu<>Hub dongle system installed on an ULTRA, CORDED helmet headsets can still be used at any time thru the standard headset connection plugs, simultaneous with either of the Bluetooth headset links.

The Blu<>Hub dongle will turn on and off automatically with the motorcycle ignition and there are NO BATTERIES EVER, to charge or replace.

Assembled in the USA at our factory in Tucson Arizona, with comprehensive linking and operation manual included.

Important Note: For the 2014-2018 StreetGlide & RoadGlide (non-Ultras) to activate the driver/passenger intercom function inside the Harley Infotainment Radio, a radio FLASH may be required either by your Harley Dealer, the Techno-Research or Diag-4-Bike digital technicians. You can also send your Harley Infotainment radio direct to J&M Corporation for this radio/intercom activation FLASH.

BluHub® Bluetooth Dongle Software Update

California Prop 65 Warning

 

ProductPicture

Product Videos and Documentation