J&M Motorcycle Audio - Fall/Winter 2018 Catalog - page 36-37

Performance Series 2 & 4 Speaker
Audio Installation Kits Complete with
180w or 360w RMS Amplifier for 98-13
Harley RoadGlide/Ultra
POW!!!
— J&M’s new 7 ¼” round drivers are the largest diameter speakers that can
be installed into the Harley RoadGlide style fairing, with cone volume and mass compa-
rable to a 6X9” speaker.
J&M’s 5 ¼” round drivers are the most efficient speakers you can install into the rear
trunk pod position on the Harley RoadGlide Ultra.
Both spec’d at 2 ohms impedance and 140/120+ watts max power, these new speakers
provide the ultimate in bass response and extended mid/high frequency range.
They feature a waterproof injection-molded polycarbonate woofer cone, high-flux strength
but light-weight Neodymium magnet, high efficiency voice coil, the latest design grillwork
with mounted tweeter and midrange, and top-quality adapter rings/bracket hardware for
secure and clean mounting into the RoadGlide fairing.
These are THE most efficient speakers you can buy for your Harley and their mounting
hole pattern and spade electrical connections are exactly the same as the factory specifi-
cation.
New J&M 2 or 4-channel
180/360w fairing/rear speaker amplifiers
have been designed specifically for use in the
1998-2013 Harley® RoadGlide/Ultra fairing.
These are full range class D amplifiers and
are spec’d at 90watts RMS per channel driven
continuous into a 2 ohm load @ 14.4vdc.
Amplifiers mount to the custom made metal
mounting bracket systems, designed specifi-
cally for the RoadGlide fairing.
Amplifier gain adjustments are factory preset
for each 2 or 4 speaker configuration.
Custom made plug-n-play wiring harnesses are
included with these speaker/amplifier kits, top
quality heavy gauge power/ground wires are
used for the fused battery connection, along
with all necessary mounting hardware & com-
plete installation/operation instructions.
Important Note:
For most 1998-2005 RoadG-
lide fairings, when upgrading from the stock 5
¼” to J&M 7.25” speakers OR when replacing
the stock Harley 5X7” speaker plates used on
2012-2013 CVO RoadGlide fairings, with speake
r
plates that can be used with the Harley 5.25” or
need J&M Roadglide speaker plate kit, part #RR
dimensional substitutes for Harley part#s 77021-98B & 77022-98B.
Perf Series 2 Speaker Installation
Kit Complete w/180w RMS 2-CH Amp 06-13 RoadGlide
$559.99
Performance Series 4 Speaker
Installation Kit Complete with 360w RMS 4-CH Amplifier
for 11-13 Harley RoadGlide Ultra
$899.99
Fairing Speaker Adapter Plate Kit 98-13
RoadGlide
$39.99
36 1-800-358-0881
RRPA-RGSPA
Performance Series
6 Speaker Audio Installation
Kit Complete with 360w RMS
Amplifier for 11-13 Harley
RoadGlide Ultra
POW!!!
— J&M’s new 7 ¼” round drivers are the larg-
est diameter speakers that can be installed into the Harley
RoadGlide style fairing, and vented lower fairings, with cone
volume and mass comparable to a 6X9” speaker.
J&M’s 5 ¼” round drivers are the largest & most efficient
speakers you can install into the rear trunk pod position on the Harley RoadGlide Ultra.
Both spec’d at 2 ohms impedance and 140/120+ watts max power, these new speak-
ers provide the ultimate in bass response and extended mid/high frequency range.
They feature a waterproof injection-molded polycarbonate woofer cone, high-flux
strength but light-weight Neodymium magnet, high efficiency voice coil, the latest design
grillwork with mounted tweeter and midrange, (plain grills only for LOWER fairing speak-
ers) and top-quality adapter rings/bracket hardware for secure and clean mounting into
the RoadGlide Ultra.
These are THE most efficient speakers you can buy for your Harley and their mounting
hole pattern and spade electrical connections are
exactly the same as the factory specification.
Lower fairing speaker housings are custom molded
to fit the late model VENTED lower fairing shells, as
mounted on the Harley RoadGlide Ultra.
New J&M 4-channel 360w fairing/rear speaker ampli-
fier kit has been designed specifically for use in the
2011-2013 Harley® RoadGlide Ultra fairing with the
Harley HK radio.
This is a full range class D amplifier and is spec’d at
90watts RMS per channel X4 channels, (360w total)
driven continuous into a 2 ohm load @ 14.4vdc.
Amplifiers mount to the custom made metal mounting
bracket systems, designed specifically for the Road
Glide fairing.
Amplifier gain adjustments are factory preset for this
6 speaker configuration on the Harley RoadGlide Ul-
tra, along with the custom in-series wiring harness for
the front upper/lower fairing speaker positions.
Custom made plug-n-play wiring harnesses are
included with this amplifier kit, top quality heavy gauge power/ground wires
are used for the fused battery connection, along with all necessary mounting
hardware & complete installation/operation instructions.
Performance Series 6 Speaker
Audio Installation Kit Complete with 360w RMS Amplifier
for 2011-2013 Harley RoadGlide Ultra
$1,349.99
1-800-358-0881
37
1...,16-17,18-19,20-21,22-23,24-25,26-27,28-29,30-31,32-33,34-35 38-39,40-41,42-43,44-45,46
Powered by FlippingBook