This is J&M's custom stereo Bluetooth A2DP dongle connection harness (ONLY, user to supply actual dongle) for all years of the Honda GL-1800/F6B.
Harness has built-in audio isolators and other electronic components to properly match the audio signal level from the GL-1800/F6B audio system, to the Bluetooth dongle, to provide superior performance at highway speeds.
This harness can utilize a variety of inexpensive, commercially available, self-powered stereo Bluetooth dongles that connect via the standard 3.5mm 3-con pin jack and transmit on the Bluetooth A2DP stereo profile (some dongle photo examples at right).
You can link most any brand Bluetooth helmet headset (including all past & present J&M model Bluetooth headsets) to the dongle and the on-board audio system becomes a music source that can be linked to the Bluetooth headset simultaneously with a cell phone, and/or other Bluetooth helmet headsets for intercom/bike-to-bike communications.
The stock handlebar volume control for the GL's audio system will control the music volume to the linked Bluetooth headset.
Easy plug-n-play installation by simply removing the left front fairing pocket assembly.
Installation of this custom J&M harness has NO effect on the audio performance or the ability to use the standard corded 5-pin headset jacks on the GL-1800.
SPECIAL NOTE: As with ALL Bluetooth headsets that utilize the GL-1800 audio system as a music source, either by wire or Bluetooth dongle, there is NO microphone signal available to the GL-1800 audio system to allow transmission over the Honda GL-1800 CB radio. If you need to be able to actually transmit over the CB radio on the Gold Wing, the ONLY choice is to use corded helmet headsets.